Quickfit® PYREX Water Distillation Kit, 4Litres/Hour

Quickfit Water Still 4Litres/Hour 3kW 230V 50/60Hz (10Amp plug required)

Manufactured in the UK, the QWS4 combines high performance with value for money. Other Water Stills may look similar, but only the QWS4 features a high-quality Pyrex® glass boiler and condenser.

Safety First
The chromium plated heating element is fitted with two thermostats to protect the still from overheating in the event of water supply failure.
The thermostats can be reset to resume Water Still operation when the water supply has been restored.

Easy Cleaning
No dismantling required. The Pyrex® glass boiler is fitted with a built-in funnel to allow the quick and easy addition of cleaning solutions.
Once the cleaning solution has done its job, simply open the GP Rotaflo® PTFE stopcock to drain the solution out of the boiler.

• Output capacity 4Litres/Hour pyrogen free* single distilled water
• Distillate quality complies with European Pharmacopoeia for Purified Water & A.S.T.M. Type 4.
• Pyrex^® glass boiler and condenser minimise potential contamination of distillate from the leaching effect of distilled water on metal components
• Distillate pH5.0-6.5
• Distillate conductivity 3.0-5.0uS/cm
• 3kW chromium plated heating element with 2 independent re-settable thermostats protect the still in the event of water supply failure
• Easy to clean. No glassware dismantling is required
• Can wall or bench mounted
• CE marked by independent testing agency
• Supplied with an instruction/operating manual

Model: QWS4
Water Still Output: 4Litres/Hour

Distillate Quality:
pH: 5.0–6.5
Conductivity: 3.0–4.0μS/cm
Resistivity: 0.25-0.30megOhm-cm
Distillate Temperature: 25-35oC

Water Supply Requirements:
Water Flow Rate: 1 litre/minute
Water Pressure: Minimum pressure 3 p.s.i. (0.207 bar)

NOTE: THIS WATER STILL REQUIRES AN ELECTRICAL PLUG OVER 10AMP. DRAIN ALSO REQUIRED FOR WASTE WATER.